Hot selling! Wood dryer supplier/ wood sawdust production line
Базовая информация
Модель: HJ series
Описание продукта
Hot selling! Wood dryer supplier/ wood sawdust production line
HJ Rotary Dryer mainly consists of rotary body, raw material feeding plate, driving and supporting device, etc. It is mainly used for cement, chemical, metallurgical, building materials industries. Its advantages are as follows: high dry capacity, smooth rotation, low energy consumption, easy operation, high output and so on.
Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator. The barrel is installed with slope to horizontal line. Materials enter the barrel from the higher side, and hot air enters the barrel from the lower side, materials and hot air mix together. Materials go to the lower side by gravity when the barrel rotates. Lifters on the inner side of barrel lift materials up and down to make materials and hot air mix completely. So drying efficiency is improved.
1. Dry strongly and shortly. The moisture in the after-drying material is even and steady.
2. Big and small transmission gears adopt pin column replaceable gear, instead of traditional steel casting gear, saving investment cost, and greatly reduce the repair cost and time.
3. Large handling capacity and high heat efficiency. When drying unbound water, its heat efficiency can reach 60%.
Model |
φ0.6×6-8 |
φ0.8×8-10 |
φ1.0×8-12 |
φ1.2×10-14 |
φ1.5×12-16 |
φ1.8×16-20 |
φ2.0×18-22 |
φ2.2×20-24 |
φ2.4×22-26 |
Diameter(mm) |
600 |
800 |
1000 |
1200 |
1500 |
1800 |
2000 |
2200 |
2400 |
Length (m) |
6-8 |
8-10 |
8-12 |
10-14 |
12-16 |
16-20 |
18-22 |
20-24 |
22-26 |
Thickness(mm) |
6 |
8 |
8 |
10 |
12 |
12 |
14 |
14 |
14 |
Volume (m3) |
1.7-2.3 |
4-5 |
6.3-9.4 |
11.3-15.8 |
21.2-28.3 |
40.7-50.9 |
56.5-69 |
76-91.2 |
99.5-117.6 |
Lifting blade |
Elevated lifting type, Cross lifting type, fan-shaped lifting type, sleeve lifting type, etc. |
||||||||
Laying gradient |
3°-5° |
||||||||
Fill rate |
8-20% |
||||||||
Material |
Heat-resistant steel, stainless steel, cast steel, carbon steel, etc. |
||||||||
Usage temperature |
180-800°C |
||||||||
Evaporation intensity |
5-120 kg/m3.h |
||||||||
Heat method |
Downstream and upstream, direct heat transfer, indirect heat transfer, compound heat transfer |
||||||||
Heat source |
Coal, oil, electricity, gas, steam, biofuels |
||||||||
Rotate speed |
3-8 r/min |
||||||||
Transmission power |
3 kw |
4 kw |
5.5-7.5 kw |
11-15 kw |
15-18.5 kw |
18.5-22 kw |
22-30 kw |
22-37 kw |
37-55 kw |
Corollary equipment |
Conveyor equipment, hot blast stove, dust removal equipment, etc. |
||||||||
Remarks |
Besides the above models, we can also supply special model as your request. |
We have so many customers at home and abroad, and our grain dryer enjoys high reputation among our clients. Our producing capacity is 50 sets per month.
We accept EXW, FOB, CIF, etc. payment terms. Some cargos are packaged in containers in our factory, some are sending to the port and then delivered. Our products also sell well abroad.
1. We are Factory (Not Dealer)
All machineries from Zhengzhou Hengjia Machinery Manufactory are made by ourselves, with lower price, good quality and assured full after service. So please buy machine from our factory.
2. Training & Service
♥ Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacture equipment according to your special demand.
♥ Sale services: servant
Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.
♥ After-sale services: faithfulness
To establish long term friendship, we will regularly pay return visit to customers.
♥ In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
3. If you are new for this business, we will help you
Many thanks for your trust; we can provide you with design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments.
4. We’d like to recommend a suitable type for you and send you a best quotation. Some questions please inform us in your enquiry.
♥ What is the raw material to be dried?
♥ What is the original moisture before drying and your request moisture after drying?
♥ How big handling capacity or output you need?
Any questions please contact us freely. We also appreciate your coming for visit!
Группа Продуктов : Оборудование для сушки > Вращающаяся сушилка
Premium Related Products